The Romac Inventory Control program is designed specifically for the Structural Steel and Plate industry. The inventory control program simulates a familiar card file system. The "card" for an individual section can be displayed on the screen or a printout can be made.

• Simplified data entry -- Steel fabricating industry standard nomenclature, single key entry of fractions, menu driven commands, and on screen prompts combine to simplify data entry. Structural and Plate sections are referenced by their actual description such as W 8 x 18, L 3 x 3 x 1/4, or PL 1/2.
• In addition to quantity on hand and size, the following information can be maintained for each individual item within the inventory:
  LOCATION
  STATUS (stock, reserved, or allocated)
  JOB NUMBER (if reserved or allocated)
  HEAT NUMBER (or other identifying mark)
  REMARK
  P.O. NUMBER
  VENDOR
  UNIT COST
  
• A quarterly consumption record can be maintained for the previous two years. Usage is reported in lbs., lin. ft., or pieces.
• The Inventory Control program will interface with our Purchase Order and Production Control programs and can be successfully implemented using our easy to follow operator's manual.

• Complete inventory listing with a weight and cost summary.
• Inventory listing by selected material specification and/or shape.
• Listing by selected location(s).
• Listing of material reserved or allocated to selected job number(s).
• Detailed listing of material used including weights and costs by material description or job number.